PMT can provide cooling coils for all types of applications and requirements.
PMT can provide ASME section VIII "U" stamp vessels, and ASME section III "N" stamp vessels. All coils can be supplied as safety related, seismic 2/1 or commercial grade. Contact PMT with your specific requirements.
PMT custom manufactures cooling coils to replace your existing coils. Coils can be manufactured like-for-like or a change in design can be implemented to allow for easier maintenance, cleaning, etc. solving long term problems.
)
Like-for-like RCP Motor Cooler Manufactured by PMT
)
Raw materials are procured for the water box cover. The cover components are cut using high pressure water for accuracy.
)
The water box cover is tach welded together on a jig.
)
Cover pass welds being completed.
)
Cover ready for heat treating and machining.
)
Flange tack welded on water box cover. Note the cover was heat treated, machined including flange face, bolt holes and vent holes. After heat treating but before machining, the cover was bead blasted to remove all heat treating residue.
)
The water box cover is back in the weld shop to have final welding completed.
)
)
)
Back side of water box cover and tube sheet showing two pass operation.
)
Finned coil with tube sheet rolled.
)
Coil back side.
)
Assembled coils ready for pressure testing. Then to be boxed up and sent to the customer for installation.